_edited.png)
Plumbing System Inspection
A plumbing inspection helps uncover issues that are often hidden, such as leaks that may not be visible but can lead to costly water bills or long-term damage. Pressure testing can help identify drops in system pressure, which may indicate leaks that could otherwise go unnoticed.
Identifying these problems before purchase or during routine maintenance can help homeowners avoid unexpected costs and expensive repairs. All inspections are non-invasive and focus on identifying potential plumbing issues in accessible areas.
Leak detection
Perform pressure tests to identify drops that could indicate hidden leaks in the plumbing system.
Pipe Assessment
Inspect visible pipes for corrosion, poor installation or damage. Check fittings and joints for integrity.
Water Pressure Testing
Measure the overall system pressure at a selected outlet using a pressure gauge.
This helps identify potential leaks, flow restrictions, or irregular pressure levels that could indicate plumbing issues.
Drainage system
Check for blockages, slow drains and other issues in the wastewater and stormwater lines to ensure proper flow.
Water Heater Inspection
Visually inspect the water heater for signs of leaks, rust or corrosion.
Check that connections are secure and that the unit appears to be in safe working condition.
Fixtures & fittings
Check all taps, toilets and showers for leaks or poor operation. Ensure fittings are secure and in good working condition.
Meter Check
We check the meter’s connections for leaks or damage.
With all taps closed, we observe whether the meter dial moves, which may indicate a hidden leak in the plumbing system.
Frequently Asked Questions- Plumbing System Inspection
Question: What does a Plumbing System Inspection involve?
Answer: A plumbing inspection checks accessible pipework, water pressure, visible leaks, drainage, hot-water systems, valves, taps, toilets, shower fittings and other accessible plumbing components. We also look for signs of hidden leaks, moisture damage, blockages and other potential problems.
Question: Why is my water pressure low?
Answer: Low water pressure can be caused by partially blocked pipes, faulty valves or pressure regulators, leaks, limescale buildup or fluctuations in the water supply. An inspection can help determine whether the problem is within the property or related to the incoming supply.
Question: What are the signs of a hidden plumbing leak?
Answer: Signs can include damp or stained walls and ceilings, musty smells, mould growth, bubbling paint, unexplained increases in water use, or unusual warm or cold areas. Thermal imaging and moisture measurements can help locate areas that require further investigation.
Question: Can Thermal Imaging detect plumbing leaks?
Answer: Yes. Thermal imaging can help identify temperature changes associated with hidden water leaks and can also show the likely route of pipework behind walls or beneath floors. Moisture measurements can then help assess whether an area is affected by active moisture.
Question: Why are my drains or shower drains slow?
Answer: Slow drainage is commonly caused by hair, soap residue, debris or a partial blockage in the waste pipe. An inspection can help determine whether the problem is local to the fixture or may be further along the drainage system.
Question: What causes bad smells or water stains in my home?
Answer: Bad smells from drains can be caused by dried traps, blockages, poor drainage or ventilation problems. Water stains on walls or ceilings may indicate a plumbing leak, roof leak or another source of moisture. Inspection helps identify the likely source and whether moisture is still present.
Question: Should I get a Plumbing Inspection before purchasing property?
Answer: Yes. Plumbing problems are not always visible during a normal viewing and can become expensive if left undiscovered. A pre-purchase inspection can identify concerns such as leaks, poor water pressure, drainage problems and visible defects, giving buyers a clearer picture of the property's condition.